Job offers in India

This position is responsible for the start-up and debug of assembly systems for electric drive, battery, and fuel cell production lines. This will include troubleshooting the electrical, pneumatic, and hydraulic systems, making PLC program, and wiring changes, and often requires small mechanical troubleshooting, and making minor adjustment/repairs with an emphasis on electrical startup and program changes. This position requires frequent travel during equipment / assembly line installations (Both domestic, international) where he / she will interface with customers. 

Roles & Responsibilities 

• Develop, program, and engineering automation solutions for demonstrators and for our customers in the automated assembly systems for electric drive, battery, and fuel cell production lines
• Setup demonstrator systems integrating hardware, software, and industrial communication protocols
• As a specialist in your subject area, you configure controls, HMIs, bus systems and interfaces to state-of-the-art subsystems
• Implement, test, debug and optimize modular software building blocks
• Use modern simulation, testing and deployment techniques in a CI / CD setting to ensure high quality solutions (e.g. using Docker)
• Work hands-on with industrial robots and sensors
• Stay up to date with ongoing developments in industrial hard- and software
• As a technical contact person for our customers on site and are responsible for the technical management of teams
• Willing to spend approx. 60 – 75% of your working time together with your colleagues directly on site with our customers globally to bring our projects to a successful conclusion

Education and Experience Requirements 

• Bachelor’s degree or diploma in Automation or Electrical & Electronic Engineering with 3–4 years of experience (or 8–9 years of experience in lieu of a degree) in programming and engineering of PLC, Edge and drive technology
• Experience in programming and engineering of PLC, edge and drive technology (TIA Portal, SIMATIC, SINAMICS, Industrial Edge) and Beckhoff Control Systems familiarity with modern software design concepts and programming languages, ideally C++, C# and Python
• Basic understanding of industrial communication protocols (TCP/IP, Ethernet, Profinet, etc.)
• Knowhow of industrial robots, sensors and their installation/calibration is beneficial
• General PC and networking skills
• Understanding and ability to read hydraulic, pneumatic and coolant hardware documentation and its settings
• Ability to read wiring plans of various feedback elements, apparatus, and their functions is an added advantage

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

This position is responsible for supporting installations and service calls exclusively at GROB’s customer sites. This individual will need to be available to travel on short notice to wherever GROB designates them to travel. While at the customer sites, this individual will be responsible for the mechanical build and start-up of machine tool equipment. The position requires strong mechanical aptitude, an in-depth knowledge of mechanical drawings, and an understanding of assembly technology and/or metal cutting principles. 

Roles & Responsibilities 

• Must respond quickly to customer installation requests or problems on short notice
• Assemble and start-up new CNC machines to GROB specifications
• Assemble and start-up assembly equipment
• Utilize precision measuring instruments (such as calipers, levels, indicators, micrometers, etc.)
• Read and follow mechanical, hydraulic, pneumatic and electrical prints/drawings
• Read and follow tool layouts and NC code (G-code, M-functions)
• Troubleshoot machine errors 

• Respond to emergency calls from customers in a timely manner 

   

Education and Experience Requirements 

• Bachelor’s Degree in Mechanical Engineering preferred
• Understanding of drawings, schematics and troubleshooting
• NC programming experience preferred
• Previous CNC machining or machine building experience preferred
• Previous experience with assembly equipment and robotic cells preferred
• 1-2 years’ relevant experience preferably from CNC machine tool manufacturing industry 

General Requirements 

• Ability to travel as required for business needs
• Self-motivated, able to work alone or in a team environment
• Full understanding of the metric system / imperial system
• Strong math skills
• Willing to work overtime as needed
• Ability to obtain and maintain a valid passport 

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

This position is responsible for the start-up and debug of machine tool equipment. This will include troubleshooting the electrical, pneumatic, and hydraulic systems, making program and wiring changes, and often requires mechanical troubleshooting and making minor adjustment/repairs with an emphasis on electrical startup and program changes. This position requires frequent travel during
machine installations (Both domestic, international) where he / she will interface with customers directly. 

Roles & Responsibilities 

• PLC programming, modifications and troubleshooting
• Creation of HMI Screen and Working on alarm texts and back-up
• Electrical hardware troubleshooting
• Servo drive parameterization and tuning
• Networking of machines to plant network and other machines
• Assist with customer part runoffs and final acceptance 

Education and Experience Requirements 

• Bachelor’s Degree in electrical engineering, Robotics & Automation, or similar programs preferred
• PLC or CNC PLC programming experience (Siemens, Allen-Bradley, Rockwell, or Fanuc 30i CNC knowledge preferred)
• Experience in Step – 7 (SIEMENS), Ladder (Fanuc) Software usage and debugging
• General PC and networking skills
• Understanding and ability to change NC Sequences – Example Fixture Clamping Sequence
• Understanding and ability to read hydraulic, pneumatic and coolant hardware documentation and its settings
• Ability to read lagger plans of various feedback elements & apparatus and their functions is an added advantage 4-5 years’ relevant experience preferably from CNC machine tool manufacturing industry and in E-Commissioning of CNC machines in the field 

General Requirements 

• Ability to work alone and in a team environment
• Excellent oral and written communication skills
• Strong math skills
• Willing to work overtime
• Willing to travel domestic and international
• Must be able to obtain and maintain a valid passport 

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

Education & Experience Requirements

• Bachelor’s degree in mechanical engineering
• Minimum 3+ years of experience of modelling and drawing
• Ability to comprehend 2-D Mechanical Engineering drawings
• Proficient use of 3D software tools like SIEMENS NX /Solidworks etc. and AUTOCAD
• Exposure in Teamcenter and use of SAP MM
• Knowledge of mechanical design, (GD&T) concepts
• Knowledge of ISO, DIN standards and metric system
• Exposure if CNC machine tools like HMC, VMC etc
• Excellent communication skills
• Knowledge of German language is advantage

Roles & Responsibilities

• Fine-tuning and finishing designs
• Versatile in conversion of 3D to 2D and vice versa
• Proficiency in preparing part and assembly detailed/ manufacturing drawings
• Verify design details and recommend modifications as needed according to company standards
• Familiar in production releases
• Create/ change BOM in SAP as per design changes
• Correspondence with machinists and assemblers

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

Roles and Responsibilities

• Read and interpret prints, sketches and diagrams to determine assembly operations
• Machine and manual bending of tubes after measuring the subassembly or machine
• Install major components such as valves and sensors
• Install fluid components on different kinds of machines
• Start-up and debugging on CNC-Machines and load units

 Requirements

• Understanding and ability to correct errors in hydraulic prints and diagrams
• Technical vocational education
• Min. 5 years of job experience in the field of fluid assembly
• Skilled in the application/installation of hydraulics, pneumatics, coolant, lubrication
• Willingness to travel
• Ability to communicate in English 
   

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

Roles and Responsibilities

• Assembling and manufacturing of all kinds of sheet metals

• Repair and adjust sheet metals

• Make drawings to manufacture sheet metals

• Checking quality of installations and eliminate leakages and malfunctions

Requirements

• Read & understand assembly drawings

• Good knowledge with handling of sheet metals

• Good technical vocational education

• Minimum 4 years of job experience

• knowledge in the field of metal cutting machine assembly and its components

• Willingness to travel

• Ability to communicate in English

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

Roles and Responsibilities

• Read and interpret prints, sketches and diagrams to understand assembly operations

• Wire manufacturing

• Check and wiring of electric drives, cabinets and consoles

• Installation and debugging of machines and their components

Requirements

• Understanding of electrical prints, sketches and diagrams

• Electrical vocational education

• Min. 4 years of job experience in the field of electric assembly

• Skilled in the installation and debugging of metal manufacturing machines

• Knowledge in handling and functions of motors and servo drives

• Willingness to travel

• Ability to communicate in English

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

• Position Name: Application Engineer
• Position Type: Permanent/Full time
• Job Location: Gudipalli IP, Satya Sai District, Andhra Pradesh 

Position Overview:

We are looking for candidate (preferably from CNC machine tools OEM) who is well versed in Siemens / Hiedenhain controller who can take up position of application engineer. The ideal candidate to have a good engineering background to study the part on their own, knowledge of cutting tools, fixture concept and CAD / CAM software’s.

Responsibilities: 

Presales and post sales activities such as

• Making technical proposal for the new enquiries
• Feasibility study of new enquiries-2D and 3D machining / Five axis parts.
• Time study and programming on 5 axis machining parts.
• Involving in Test cut planning and preparation till completion
• Co-operation with suppliers and businesses partners
• Customer training
• Arranging webinar and tech days
• Arranging in house training 

Qualifications:

• BE-Mechanical Graduate or Diploma in Mechanical Engineering.
• 5 to 10 years of experience in machine tools / relevant industry.

Salary:

• As per industry standards.

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

• Position Type: Permanent/Full time  
• Job Location: Gujarat(Stationed in Vadodara / Ahmedabad)
• Product responsible: Machining Technology / system machines / E-mobility

Position Overview:

We are looking for experienced candidate (Preferably in CNC machine tools) Sales Manager to lead our market in Northwest region (Gujarat). 

This role requires a combination of field sales expertise and technical acumen to connect with the end users effectively. The ideal candidate will have a good engineering background and a proven track record in field sales within the machine tools or cutting tools or work holding products or tool holder sectors.

Key Responsibilities: 

•  Sales: Engage in direct, personal visit-based selling with customers, as per pre-set schedules and achieve sales targets
•  Sales Support: Facilitate, coordinate, and support in achieving targets
•  Strategic Planning: Develop and implement both short-term and long-term sales plans
•  Customer Engagement: Actively add new customers while nurturing existing relationships across India
•  Resource Allocation: Ensure optimal use of resources for financially balanced operations
•  Market Coverage: Cover a wide range of customer segments, including Aerospace, Die-mold, Automobile OEMs and Auto part makers, Power Equipment, and other manufacturing industries
•  Travel: This role requires travel across North India

Qualifications:  

•  BE-Mechanical Graduate or Diploma in Mechanical Engineering
•  5 to 10 years of field sales experience in machine tools / cutting tools or CNC capital equipment
•  Adequate process engineering knowledge and ability to engage meaningfully with the end-users
•  Excellent customer relationship management skills and ability to implement systematic sales schedules  
•  Demonstrated success in meeting and exceeding sales targets

Salary:

•  As per industry standards

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com

• Position Type: Permanent/Full time  
• Job Location: Delhi/NCR
• Product responsible: Machining Technology / system machines / E-mobility

Position Overview: 

We are looking for experienced candidate (preferably in CNC machine tools) Sales Manager to lead our market in North India. This role requires a combinati on of field sales expertise and technical acumen to connect with the end users effectively.  The ideal candidate will have a good engineering background and a proven track record in field sales within the machine tools or cutting tools or work holding products or tool holder sectors.  

Key Responsibilities: 

•  Sales: Engage in direct, personal visit-based selling with customers, as per pre-set schedules and achieve sales targets
•  Sales Support: Facilitate, coordinate, and support in achieving targets
•  Strategic Planning: Develop and implement both short-term and long-term sales plans
•  Customer Engagement: Acti vely add new customers while nurturing existing relationships across India
•  Resource Allocation: Ensure optimal use of resources for financially balanced operations
•  Market Coverage: Cover a wide range of customer segments, including Aerospace, Die-mold, Automobile OEMs and Auto part makers, Power Equipment, and other manufacturing industries
•  Travel: This role requires travel across North India

Qualifications:  

•  BE-Mechanical Graduate or Diploma in Mechanical Engineering
•  5 to 10 years of field sales experience in machine tools / cutting tools or CNC capital equipment  
•  Adequate process engineering knowledge and ability to engage meaningfully with the end-users
•  Excellent customer relationship management skills and ability to implement systematic sales schedules  
•  Demonstrated success in meeting and exceeding sales targets  

Salary: 

•  As per industry standards
 

Contact:

GROB MACHINE TOOLS INDIA Private Limited
Plot No 5A, IP Gudipalli, Somandepalli (Mandal),
Sri Satya Sai (District),
Andhra Pradesh,
515122 Indien

E-mail: hr.grobindia@grobgroup.com